1200TW Accessories
Showing 25–33 of 33 results
Swab Plate – 12″ Pull Plate (sizing plate) for 10″ pull bar * PDP830
Pull Bars and plates are used to clean out the bore hole after backreaming. To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.
Swab Plate – 14″ Pull Plate (sizing plate) for 10″ pull bar *PDP831
Pull Bars are used to clean out the bore hole after backreaming. Pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.
Swab Plate – 16″ Pull Plate (sizing plate) for 10″ pull bar *PDP832
Pull Bars and plates are used to clean out the bore hole after backreaming. To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.
Swab Plate – 18″ Pull Plate (sizing plate) for 10″ pull bar *PDP833
Pull Bars and plates are used to clean out the bore hole after backreaming. To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.
Swab Plate – 20″ Pull Plate (sizing plate) for 10″ pull bar *PDP834
Pull Bars and plates are used to clean out the bore hole after backreaming. To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.
Swab Plate – 22″ Pull Plate (sizing plate) for 10″ pull bar *PDP835
Pull Bars and plates are used to clean out the bore hole after backreaming. To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.
Swab Plate – 24″ Pull Plate (sizing plate) for 10″ pull bar *PDP836
Pull Bars and plates are used to clean out the bore hole after backreaming. To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.
Swab Plate – 8″ Pull Plate (sizing plate) for 4″ pull bar * PDP828
Pull Bars and plates are used to clean out the bore hole after backreaming. To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.
Swivel – Heavy duty cable swivel SMSD thread *PDP804
Heavy duty cable swivel Heavy duty cable swivel for use with all models larger than the 140EW “pup” Used to pull back a cable when backreaming. The cable can then be used to pull pipe or conduit into the bore … Continued