Drill Rod – 1/2″ x 5′ Drill Rod SMSD thread *PDP802Q-1
Drill Rod – 1/2″ x 5′ Drill Rod SMSD thread *PDP802Q-1

1/2′ x 5 foot rods for use with 140EW

$75.09 +Sales Tax where applicable Add to cart
Drill Rod – 1/2″ x 7′ Drill Rod SMSD thread *PDP802Q
$79.55 +Sales Tax where applicable Add to cart
Pilot Bit – 2″ Pilot Bit SMSD thread w/carbide *PDP808-1
Pilot Bit – 2″ Pilot Bit SMSD thread w/carbide *PDP808-1

2″ Pilot Bit SMSD thread with Carbide

$124.12 +Sales Tax where applicable Add to cart
Reamer – 4″ Backreamer SMSD thread w/carbide *PDP810-1
Reamer – 4″ Backreamer SMSD thread w/carbide *PDP810-1

All backreamers require a cable swivel or backreamer cap

$259.73 +Sales Tax where applicable Add to cart
Reamer – 3″ Backreamer SMSD thread w/carbide *PDP809-1;
Reamer – 3″ Backreamer SMSD thread w/carbide *PDP809-1;

Cable swivels or backreamer caps are needed with all backreamers.

$212.09 +Sales Tax where applicable Add to cart
Swab – 4″ Pull Bar (Swab) *PDP825
Swab – 4″ Pull Bar (Swab) *PDP825
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$227.76 +Sales Tax where applicable Add to cart
Swivel – Light duty cable swivel SMSD thread *PDP804-2
Swivel – Light duty cable swivel SMSD thread *PDP804-2
Light duty cable swivel for use with PDP140EW "pup"  handheld boring machine. Used to pull back a cable when backreaming.  The cable can then be used to pull pipe or conduit into the bore hole.  Can also be used to pull pipe, conduit or direct burial cable back through the hole as drill rods are being removed if backreaming is not necessary.
$78.57 +Sales Tax where applicable Add to cart