Reamer Rock– 4″ backreamer SMSD thread w/carbide *PDP810-1R
Reamer Rock– 4″ backreamer SMSD thread w/carbide *PDP810-1R

This reamer is designed specifically for backreaming through cobble, hardpan, sandstone, shale, limestone and any borable rock or hard soils.  The conical design enhances cutting by exposing as much carbide to the surface as possible.  Four blades with a ring … Continued

$876.48 +Sales Tax where applicable Add to cart
Reamer Rock– 6″ backreamer LGSD thread w/carbide *PDP811-3R
Reamer Rock– 6″ backreamer LGSD thread w/carbide *PDP811-3R

This reamer is designed specifically for backreaming through cobble, hardpan, sandstone, shale,  limestone and any borable rock or hard soils.  The conical design enhances cutting by exposing as much carbide to the surface as possible.  Four blades with a ring … Continued

$1,096.98 +Sales Tax where applicable Add to cart
Reamer Rock– 6″ backreamer SMSD thread w/carbide *PDP811-1R
Reamer Rock– 6″ backreamer SMSD thread w/carbide *PDP811-1R

This reamer is designed specifically for backreaming through cobble, hardpan, sandstone, shale, limestone and any borable rock or hard soils.  The conical design enhances cutting by exposing as much carbide to the surface as possible.  Four blades with a ring … Continued

$1,031.94 +Sales Tax where applicable Add to cart
Reamer Rock– 8″ backreamer LGSD thread w/carbide *PDP812-3R
Reamer Rock– 8″ backreamer LGSD thread w/carbide *PDP812-3R

This reamer is designed specifically for backreaming through cobble, hardpan, sandstone, shale, limestone and any borable rock or hard soils.  The conical design enhances cutting by exposing as much carbide to the surface as possible.  Four blades with a ring … Continued

$1,212.75 +Sales Tax where applicable Add to cart
Reamer Rock– 8″ backreamer SMSD thread w/carbide *PDP812-1R
Reamer Rock– 8″ backreamer SMSD thread w/carbide *PDP812-1R

This reamer is designed specifically for backreaming through cobble, hardpan, sandstone, shale, limestone and any borable rock or hard soils.  The conical design enhances cutting by exposing as much carbide to the surface as possible.  Four blades with a ring … Continued

$1,152.11 +Sales Tax where applicable Add to cart
Swab –  10″ Pull Bar (swab) *PDP825-3
Swab – 10″ Pull Bar (swab) *PDP825-3
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$351.64 +Sales Tax where applicable Add to cart
Swab –  4″ Pull Bar (Swab) *PDP825
Swab – 4″ Pull Bar (Swab) *PDP825
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$251.09 +Sales Tax where applicable Add to cart
Swab Plate –  6″ Pull Plate (sizing plate) for 4″ Pull Bar *PDP827
Swab Plate – 6″ Pull Plate (sizing plate) for 4″ Pull Bar *PDP827
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$56.23 +Sales Tax where applicable Add to cart
Swab Plate – 12″ Pull Plate (sizing plate) for 10″ pull bar * PDP830
Swab Plate – 12″ Pull Plate (sizing plate) for 10″ pull bar * PDP830
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$88.22 +Sales Tax where applicable Add to cart
Swab Plate – 14″ Pull Plate (sizing plate) for 10″ pull bar *PDP831
Swab Plate – 14″ Pull Plate (sizing plate) for 10″ pull bar *PDP831
Pull Bars are used to clean out the bore hole after backreaming.  Pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$100.86 +Sales Tax where applicable Add to cart
Swab Plate – 16″ Pull Plate (sizing plate) for 10″ pull bar *PDP832
Swab Plate – 16″ Pull Plate (sizing plate) for 10″ pull bar *PDP832
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$111.84 +Sales Tax where applicable Add to cart
Swab Plate – 18″ Pull Plate (sizing plate) for 10″ pull bar *PDP833
Swab Plate – 18″ Pull Plate (sizing plate) for 10″ pull bar *PDP833
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$226.14 +Sales Tax where applicable Add to cart