Pilot Bit – 2″ Pilot Bit SMSD thread w/carbide *PDP808-1
Pilot Bit – 2″ Pilot Bit SMSD thread w/carbide *PDP808-1

2″ Pilot Bit SMSD thread with Carbide

$124.12 +Sales Tax where applicable Add to cart
Reamer – 4″ Backreamer SMSD thread w/carbide *PDP810-1
Reamer – 4″ Backreamer SMSD thread w/carbide *PDP810-1

All backreamers require a cable swivel or backreamer cap

$259.73 +Sales Tax where applicable Add to cart
Reamer – 6″ Backreamer SMSD thread w/carbide *PDP811-1
Reamer – 6″ Backreamer SMSD thread w/carbide *PDP811-1

All backreamers require a cable swivel or backreamer cap

$312.00 +Sales Tax where applicable Add to cart
Reamer – 8″ Backreamer SMSD thread w/carbide *PDP812-1
Reamer – 8″ Backreamer SMSD thread w/carbide *PDP812-1

All backreamers require a cable swivel or backreamer cap

$347.79 +Sales Tax where applicable Add to cart
Reamer – 3″ Backreamer SMSD thread w/carbide *PDP809-1;
Reamer – 3″ Backreamer SMSD thread w/carbide *PDP809-1;

Cable swivels or backreamer caps are needed with all backreamers.

$212.09 +Sales Tax where applicable Add to cart
Swab – 4″ Pull Bar (Swab) *PDP825
Swab – 4″ Pull Bar (Swab) *PDP825
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$227.76 +Sales Tax where applicable Add to cart
Swab Plate – 6″ Pull Plate (sizing plate) for 4″ Pull Bar *PDP827
Swab Plate – 6″ Pull Plate (sizing plate) for 4″ Pull Bar *PDP827
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$51.01 +Sales Tax where applicable Add to cart
Swab Plate – 8″ Pull Plate (sizing plate) for 4″ pull bar * PDP828
Swab Plate – 8″ Pull Plate (sizing plate) for 4″ pull bar * PDP828
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$62.07 +Sales Tax where applicable Add to cart
Swivel – Heavy duty cable swivel SMSD thread *PDP804
Swivel – Heavy duty cable swivel SMSD thread *PDP804

Heavy duty cable swivel Heavy duty cable swivel for use with all models larger than the 140EW “pup” Used to pull back a cable when backreaming.  The cable can then be used to pull pipe or conduit into the bore … Continued

$192.87 +Sales Tax where applicable Add to cart