Back to Boring Machines
1800TW 8-3-13

Boring Machine – Prairie Dog model 1800TW

$15,572.38 +Sales Tax where applicable

Our most powerful boring machine.  With maximum HP and torque this machine is capable making light work of seemingly impossible bores in the toughest conditions.  Featuring an electric start Honda V-Twin engine and rugged American made gear-box this machine is built for years of dependable service.  Mount this machine on a gooseneck trailer with a mini excavator and a water tank for a self contained, full service boring rig that can be operated by a two man crew.

1800TW demo video

Category:

Description

Maximum Power for big bores or tough conditions

Prairie Dog Model 1800TW boring machine

PAYMENTS AS LOW AS $351.16 PER MONTH*

1800TW 8 3 13 300x178 - Boring Machine - Prairie Dog model 1800TW

 

Weight: 395 lbs                                                                                                                                  Dimensions: 36” x 102” x 18”
Engine: 18 hp Honda V-Twin
Transmission: Planetary, forward, neutral, reverse
Advance: Rack & Pinion
Capacity: 2”-28” x 200 feet or more

Can be used with SMSD Rods or higher strength LGSD Rods.  SMSD rods not recommended for bores over 18″ or more than 150 feet

2″ pilot bit is not compatible with LGSD rods.  You must order LGSD 3″ Pilot bit, LGSD backreamers and swivel.

*WITH APPROVED CREDIT THROUGH NAVITAS CREDIT CORP. MOST CREDIT APPLICATIONS PROCESSED WITHIN HOURS.

EZ online credit application available at checkout.

This model has many options.  Please call if you need assistance with ordering.

Additional information

Weight 425 lbs
Dimensions 102 x 20 x 40 in

You may also like…

Swivel – Heavy duty cable swivel LGSD thread *PDP804-91
Swivel – Heavy duty cable swivel LGSD thread *PDP804-91

Heavy duty cable swivel For use only with model 1800TW when using LGSD threaded drill rods. Used to pull back a cable when backreaming.  The cable can then be used to pull pipe or conduit into the bore hole.  Can … Continued

$237.21 +Sales Tax where applicable Add to cart
Reamer – 8″ Backreamer LGSD thread w/carbide *PDP812-3
Reamer – 8″ Backreamer LGSD thread w/carbide *PDP812-3

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$418.81 +Sales Tax where applicable Add to cart
Reamer – 12″ Backreamer SMSD thread w/carbide *PDP814-1
Reamer – 12″ Backreamer SMSD thread w/carbide *PDP814-1

All backreamers require a cable swivel or backreamer cap

$441.51 +Sales Tax where applicable Add to cart
Reamer – 20″ Backreamer LGSD thread w/carbide *PDP818-2
Reamer – 20″ Backreamer LGSD thread w/carbide *PDP818-2

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$1,274.94 +Sales Tax where applicable Add to cart
Swab Plate – 26″ Pull Plate (sizing plate) for 10″ pull bar *PDP837
Swab Plate – 26″ Pull Plate (sizing plate) for 10″ pull bar *PDP837
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$357.42 +Sales Tax where applicable Add to cart
Swab Plate – 8″ Pull Plate (sizing plate) for 4″ pull bar * PDP828
Swab Plate – 8″ Pull Plate (sizing plate) for 4″ pull bar * PDP828
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$62.07 +Sales Tax where applicable Add to cart
Swab Plate – 22″ Pull Plate (sizing plate) for 10″ pull bar *PDP835
Swab Plate – 22″ Pull Plate (sizing plate) for 10″ pull bar *PDP835
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$285.04 +Sales Tax where applicable Add to cart
Swab – 10″ Pull Bar (swab) *PDP825-3
Swab – 10″ Pull Bar (swab) *PDP825-3
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$328.48 +Sales Tax where applicable Add to cart
Swab Plate – 24″ Pull Plate (sizing plate) for 10″ pull bar *PDP836
Swab Plate – 24″ Pull Plate (sizing plate) for 10″ pull bar *PDP836
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$307.39 +Sales Tax where applicable Add to cart
Swab Plate – 6″ Pull Plate (sizing plate) for 4″ Pull Bar *PDP827
Swab Plate – 6″ Pull Plate (sizing plate) for 4″ Pull Bar *PDP827
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$51.01 +Sales Tax where applicable Add to cart
Drill Rod – 1.25″ x 4′ Drill Rod SMSD thread *PDP802A
Drill Rod – 1.25″ x 4′ Drill Rod SMSD thread *PDP802A

1.25″ x 4 foot Drill Rod SMSD threat

$89.44 +Sales Tax where applicable Add to cart
Swab – 4″ Pull Bar (Swab) *PDP825
Swab – 4″ Pull Bar (Swab) *PDP825
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$227.76 +Sales Tax where applicable Add to cart
Reamer – 14″ Backreamer LGSD thread w/carbide *PDP815-3
Reamer – 14″ Backreamer LGSD thread w/carbide *PDP815-3

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$736.88 +Sales Tax where applicable Add to cart
Swab Plate – 16″ Pull Plate (sizing plate) for 10″ pull bar *PDP832
Swab Plate – 16″ Pull Plate (sizing plate) for 10″ pull bar *PDP832
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$101.45 +Sales Tax where applicable Add to cart
Reamer – 6″ Backreamer LGSD thread w/carbide *PDP811-5
Reamer – 6″ Backreamer LGSD thread w/carbide *PDP811-5

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$380.98 +Sales Tax where applicable Add to cart
Reamer – 10″ Backreamer LGSD thread w/carbide *PDP813-3
Reamer – 10″ Backreamer LGSD thread w/carbide *PDP813-3

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$496.59 +Sales Tax where applicable Add to cart
Reamer – 18″ Backreamer LGSD thread w/carbide *PDP817-2H
Reamer – 18″ Backreamer LGSD thread w/carbide *PDP817-2H

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$1,123.87 +Sales Tax where applicable Add to cart
Swab Plate – 28″ Pull Plate (sizing plate) for 10″ pull bar *PDP840
Swab Plate – 28″ Pull Plate (sizing plate) for 10″ pull bar *PDP840
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$404.52 +Sales Tax where applicable Add to cart
Reamer – 24″ Backreamer LGSD thread w/carbide *PDP824-1
Reamer – 24″ Backreamer LGSD thread w/carbide *PDP824-1

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$1,446.38 +Sales Tax where applicable Add to cart
Reamer – 22″ Backreamer LGSD thread w/carbide *PDP822-1
Reamer – 22″ Backreamer LGSD thread w/carbide *PDP822-1

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$1,391.62 +Sales Tax where applicable Add to cart
Pilot Bit – 2″ Pilot Bit SMSD thread w/carbide *PDP808-1
Pilot Bit – 2″ Pilot Bit SMSD thread w/carbide *PDP808-1

2″ Pilot Bit SMSD thread with Carbide

$124.12 +Sales Tax where applicable Add to cart
Swab Plate – 12″ Pull Plate (sizing plate) for 10″ pull bar * PDP830
Swab Plate – 12″ Pull Plate (sizing plate) for 10″ pull bar * PDP830
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$80.02 +Sales Tax where applicable Add to cart
Reamer – 3″ Backreamer SMSD thread w/carbide *PDP809-1;
Reamer – 3″ Backreamer SMSD thread w/carbide *PDP809-1;

Cable swivels or backreamer caps are needed with all backreamers.

$212.09 +Sales Tax where applicable Add to cart
Reamer – 12″ Backreamer LGSD thread w/carbide *PDP814-3
Reamer – 12″ Backreamer LGSD thread w/carbide *PDP814-3

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$637.99 +Sales Tax where applicable Add to cart
Reamer – 20″ Backreamer SMSD thread w/carbide *PDP818-1
Reamer – 20″ Backreamer SMSD thread w/carbide *PDP818-1

All Backreamers require a cable swivel or backreamer cap

$948.44 +Sales Tax where applicable Add to cart
Reamer – 22″ Backreamer SMSD thread w/carbide * PDP822
Reamer – 22″ Backreamer SMSD thread w/carbide * PDP822

All backreamers require a cable swivel or backreamer cap

$1,044.54 +Sales Tax where applicable Add to cart
Reamer – 28″ Backreamer LGSD thread w/carbide *PDP825-1
Reamer – 28″ Backreamer LGSD thread w/carbide *PDP825-1

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$1,834.98 +Sales Tax where applicable Add to cart
Reamer – 16″ backreamer SMSD thread w/carbide *PDP816-1
Reamer – 16″ backreamer SMSD thread w/carbide *PDP816-1

All backreamers require a cable swivel or backreamer cap

$680.66 +Sales Tax where applicable Add to cart
Reamer – 6″ Backreamer SMSD thread w/carbide *PDP811-1
Reamer – 6″ Backreamer SMSD thread w/carbide *PDP811-1

All backreamers require a cable swivel or backreamer cap

$312.00 +Sales Tax where applicable Add to cart
Reamer – 18″ Backreamer SMSD thread w/carbide *PDP817-1
Reamer – 18″ Backreamer SMSD thread w/carbide *PDP817-1

All Backreamers require a cable swivel or backreamer cap

$905.64 +Sales Tax where applicable Add to cart
Swab Plate – 20″ Pull Plate (sizing plate) for 10″ pull bar *PDP834
Swab Plate – 20″ Pull Plate (sizing plate) for 10″ pull bar *PDP834
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$257.08 +Sales Tax where applicable Add to cart
Reamer – 10″ Backreamer SMSD thread w/carbide *PDP813-1
Reamer – 10″ Backreamer SMSD thread w/carbide *PDP813-1

All backreamers require a cable swivel or backreamer cap

$380.72 +Sales Tax where applicable Add to cart
Reamer – 26″ Backreamer LGSD thread w/carbide *PDP824-B1
Reamer – 26″ Backreamer LGSD thread w/carbide *PDP824-B1

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$1,607.89 +Sales Tax where applicable Add to cart
Swab Plate – 18″ Pull Plate (sizing plate) for 10″ pull bar *PDP833
Swab Plate – 18″ Pull Plate (sizing plate) for 10″ pull bar *PDP833
Pull Bars and plates are used to clean out the bore hole after backreaming.  To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$226.14 +Sales Tax where applicable Add to cart
Reamer – 24″ Backreamer SMSD thread w/carbide *PDP824
Reamer – 24″ Backreamer SMSD thread w/carbide *PDP824

All backreamers require a cable swivel or backreamer cap

$1,093.89 +Sales Tax where applicable Add to cart
Swivel – Heavy duty cable swivel SMSD thread *PDP804
Swivel – Heavy duty cable swivel SMSD thread *PDP804

Heavy duty cable swivel Heavy duty cable swivel for use with all models larger than the 140EW “pup” Used to pull back a cable when backreaming.  The cable can then be used to pull pipe or conduit into the bore … Continued

$192.87 +Sales Tax where applicable Add to cart
Reamer – 14″ Backreamer SMSD thread w/carbide *PDP815-1
Reamer – 14″ Backreamer SMSD thread w/carbide *PDP815-1

All backreamers require a cable swivel or backreamer cap

$566.86 +Sales Tax where applicable Add to cart
Reamer – 16″ Backreamer LGSD thread w/carbide *PDP816-3
Reamer – 16″ Backreamer LGSD thread w/carbide *PDP816-3

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$838.65 +Sales Tax where applicable Add to cart
Drill Rod – 1.75″ x 4′ Drill Rod LGSD thread *PDP802H
Drill Rod – 1.75″ x 4′ Drill Rod LGSD thread *PDP802H

1.75″ x 4 foot Drill Rod SMSD threat

$145.36 +Sales Tax where applicable Add to cart
Reamer – 4″ Backreamer LGSD thread w/carbide *PDP810-4
Reamer – 4″ Backreamer LGSD thread w/carbide *PDP810-4

For Use with Model 1800 when used in conjunction with LGSD threaded drill rods All backreamers require a cable swivel

$357.16 +Sales Tax where applicable Add to cart
Swab Plate – 14″ Pull Plate (sizing plate) for 10″ pull bar *PDP831
Swab Plate – 14″ Pull Plate (sizing plate) for 10″ pull bar *PDP831
Pull Bars are used to clean out the bore hole after backreaming.  Pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming.  Attach the cable to the pull bar and pull it through the hole to remove any remaining debris.  Plates are added to the pull bar for sizes larger than the bar itself.
$91.49 +Sales Tax where applicable Add to cart
Reamer – 8″ Backreamer SMSD thread w/carbide *PDP812-1
Reamer – 8″ Backreamer SMSD thread w/carbide *PDP812-1

All backreamers require a cable swivel or backreamer cap

$347.79 +Sales Tax where applicable Add to cart
Reamer – 4″ Backreamer SMSD thread w/carbide *PDP810-1
Reamer – 4″ Backreamer SMSD thread w/carbide *PDP810-1

All backreamers require a cable swivel or backreamer cap

$259.73 +Sales Tax where applicable Add to cart

Related products

Boring Machine – Prairie Dog model PDP140EW “pup”
Boring Machine – Prairie Dog model PDP140EW “pup”
Boring distance and capacity may be dependent on soil conditions.  Please contact us if you have any questions.
$1,978.42 +Sales Tax where applicable Add to cart
Boring Machine – Prairie Dog model 700TWG
Boring Machine – Prairie Dog model 700TWG
This compact workhorse has the power you need to get through tough conditions but is small enough to use in confined spaces. Much more dependable, accurate and versatile than a missile.  All you need is a water supply not an expensive air compressor. This machine will easily fit in the back of a pickup or you can load it on a trailer with your mini-excavator and a portable water supply for a completely self contained boring rig you can haul with a 1/2 or 3/4 ton pickup. Not convinced it has the power to handle tough conditions?  Check out this demo we did on the yard boring through a 10" piece of concrete.  Pay particular attention to the lack of wear on the pilot bit and backreamer.  700TWG demo Can your missile do that?  Didn't think so!
$5,063.68 +Sales Tax where applicable Add to cart
Boring Machine – Prairie Dog model 900TW
Boring Machine – Prairie Dog model 900TW
Our most popular machine.  This model offers an excellent combination of affordability and production.  Popular with utility contractors, municipalities, municipal utility districts, management companies, private water companies and other service companies.  This machine can handle long taps for water service and even main line road crossings.  Set on grade they can handle bores for sewer laterals.  Carbide tipped bits and backreamers stand up to the toughest conditions.  The Honda engine and American made transmission both offer the ease of maintenance and dependability that is expected from a Prairie Dog Machine. Need to see it in action to be convinced?  Take a look at this video of a 50' then a 108' bore.  First job and they nailed it!   900TW Demo bore
$8,475.54 +Sales Tax where applicable Add to cart
Boring Machine – Prairie Dog model 700TWA *Confined space machine*
Boring Machine – Prairie Dog model 700TWA *Confined space machine*

Prairie Dog Model 900TW boring machine PAYMENTS AS LOW AS $213.15 PER MONTH* Weight: 325 lbs,                                                                                                                                   Dimensions: 36” x 102” x 18”                                     … Continued

$9,452.45 +Sales Tax where applicable Add to cart