Back to 140 accessories
Guides – Drill rod guides (set of two) for 140EW, 500RTW and 900RTW *PDP804-QGD
$225.00 +Sales Tax where applicable
Related products

Swab – 4″ Pull Bar (Swab) *PDP825
Pull Bars and plates are used to clean out the bore hole after backreaming. To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.

Reamer – 10″ Backreamer SMSD thread w/carbide *PDP813-1
All backreamers require a cable swivel or backreamer cap

Pilot Bit – 2″ Pilot Bit SMSD thread w/carbide *PDP808-1
2″ Pilot Bit SMSD thread with Carbide

Swab Plate – 14″ Pull Plate (sizing plate) for 10″ pull bar *PDP831
Pull Bars are used to clean out the bore hole after backreaming. Pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.