Description
All backreamers require a cable swivel or backreamer cap
Back to 700TWG Accessories
Reamer – 4″ Backreamer SMSD thread w/carbide *PDP810-1
$286.34 +Sales Tax where applicable
You may also like…
Swivel – Heavy duty cable swivel SMSD thread *PDP804
Heavy duty cable swivel Heavy duty cable swivel for use with all models larger than the 140EW “pup” Used to pull back a cable when backreaming. The cable can then be used to pull pipe or conduit into the bore … Continued
Swivel – Light duty cable swivel SMSD thread *PDP804-2
Light duty cable swivel for use with PDP140EW "pup" handheld boring machine.
Used to pull back a cable when backreaming. The cable can then be used to pull pipe or conduit into the bore hole. Can also be used to pull pipe, conduit or direct burial cable back through the hole as drill rods are being removed if backreaming is not necessary.
Related products
Reamer – 16″ backreamer SMSD thread w/carbide *PDP816-1
All backreamers require a cable swivel or backreamer cap
Drill Rod – 1/2″ x 5′ Drill Rod SMSD thread *PDP802Q-1
1/2′ x 5 foot rods for use with 140EW
Swab Plate – 8″ Pull Plate (sizing plate) for 4″ pull bar * PDP828
Pull Bars and plates are used to clean out the bore hole after backreaming. To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.
Swab Plate – 12″ Pull Plate (sizing plate) for 10″ pull bar * PDP830
Pull Bars and plates are used to clean out the bore hole after backreaming. To use pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.