Description
Cable swivels or backreamer caps are needed with all backreamers.
Back to 1200TW Accessories
Reamer – 3″ Backreamer SMSD thread w/carbide *PDP809-1;
$233.82 +Sales Tax where applicable
You may also like…
Swivel – Heavy duty cable swivel SMSD thread *PDP804
Heavy duty cable swivel Heavy duty cable swivel for use with all models larger than the 140EW “pup” Used to pull back a cable when backreaming. The cable can then be used to pull pipe or conduit into the bore … Continued
Swivel – Light duty cable swivel SMSD thread *PDP804-2
Light duty cable swivel for use with PDP140EW "pup" handheld boring machine.
Used to pull back a cable when backreaming. The cable can then be used to pull pipe or conduit into the bore hole. Can also be used to pull pipe, conduit or direct burial cable back through the hole as drill rods are being removed if backreaming is not necessary.
Related products
$166.75 +Sales Tax where applicable
Add to cart
Reamer – 8″ Backreamer SMSD thread w/carbide *PDP812-1
All backreamers require a cable swivel or backreamer cap
Swab Plate – 14″ Pull Plate (sizing plate) for 10″ pull bar *PDP831
Pull Bars are used to clean out the bore hole after backreaming. Pull a heavy, 1/2" or larger, wire rope cable through as you are backreaming. Attach the cable to the pull bar and pull it through the hole to remove any remaining debris. Plates are added to the pull bar for sizes larger than the bar itself.
Reamer – 10″ Backreamer SMSD thread w/carbide *PDP813-1
All backreamers require a cable swivel or backreamer cap